BeauCloR HB is an unmodified chlorinated rubber coating with high build characteristics. It is designed for application over appropriate primers providing a coating system with exceptional water impermeability and salt spray resistance, coupled with excellent resistance to acids and alkalis. Thick Coating is recommended for the protection of steel structures in chemical plants, fertilizer plants, plating shops, paper mills, and breweries, exterior coatings on chemical storage tanks and for use in the mining industry. Thick Coating is ideal for use on masonry buildings and cold rooms under conditions of high humidity and condensation. Because of initial slow solvent release chlorinated rubber coatings are more suitable for on-site application, however, if transporting shortly after application, care should be taken to ensure painted surfaces are not in contact. |
|
. |
|
TYPICAL PROPERTIES |
|
. |
|
Classification |
High build chlorinated rubber coating. |
Finish |
Semi-gloss |
Color reference |
Off White. |
Components |
ONE |
Volume Solids |
30±4% |
Weight Solids |
54±4% |
S. Gravity |
1.25±0.05 |
Flash point |
23oC |
Shelf Life |
6 months (Avoid Storage under hot conditions) |
Wet Film Per Coat |
180 Microns |
Dry Film Per Coat (DFT) |
70-75 Microns(Can be reduced with thinner) |
Practical Coverage at Recommended DFT |
4-5 sq. meters per liter corresponds to 70-75 Microns (Assumes no material loss) |
. |
|
CURING TIME |
|
. |
|
Touch |
4 hours |
Handle |
24 hours |
Recoat |
6 hours |
. |
|
PACKING |
|
. |
|
Standard Packing |
Single Component: 3.64L, 16L |