BeauCloR Prime CP – Concrete CR Primer
BeauCloR Prime CP is based on unmodified chlorinated rubber resin. When used in combination with BeauCloR topcoats, the coating system exhibits exceptional water impermeability, resistance to salt spray and also spillage and fumes of most acids, salt solutions, alkalis, bleaching agents and corrosive gases. BeauCloR Prime CP is designed for adhesion to concrete, plaster and masonry surfaces where exposure to chemicals, acids and alkalis is required. It is frequently specified in fertilizer plants, plating shops, gas works, paper mills, exteriors of chemical storage tanks and areas subject to high humidity and condensation. | |
. | |
TYPICAL PROPERTIES | |
. | |
Classification | Chlorinated Rubber |
Finish | low -sheen |
Color reference | Off-White |
Components | One |
Volume Solids | 30±4% |
Weight Solids | 54±4% |
S. Gravity | 1.25±0.1 |
Flash point | 23oC |
Shelf Life | 6 months. Avoid Storage under hot conditions. |
Wet Film Per Coat | 75-85 Microns |
Dry Film Per Coat (DFT) | 25 Microns |
Practical Coverage at Recommended DFT | 12-15 m2/litre corresponds to 20-25 Microns (assumes no losses on a non-porous and non-absorbent surface) |
. | |
CURING TIME | |
. | |
Touch | 2 hours |
Handle | 24 hours |
Recoat | 8 hours |
. | |
PACKING | |
. | |
Standard Packing | Single Component: 3.64L, 16L |